Integrations - Ampio - Knowledge Base

Integration of the Ampio system with Node-RED

A guide for the integration of the Ampio system with Node-RED, either via predefined nodes, or an MQTT broker.

Last update April 16, 2025, tags: Automations, Configuration, Integrations, IP, Node-RED

M-OC-C8s: Module with eight OC outputs and an RGBW controller functionality

Module M-OC-C8s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eight OC outputs, four ground-detecting inputs and supports the functionality of an RGBW lighting controller.

Last update April 8, 2025, tags: CCT, Ampio CAN modules, OC family, Integrations, Output modules, DIN rail modules, Lights, LED lights, RGBW lights, Open-collector drivers, Central heating, Security, Wall switch

M-CON-DL-s: DALI bus Integration module MDALI-1s, M-CON-DALI-s

Module M-CON-DL-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is intended for integration with lighting with a Dali interface. Dali is the main lighting used in industrial halls, large-format supermarkets and with the ongoing rapid development of automation systems, also in residential buildings.

Last update April 8, 2025, tags: CCT, Ampio CAN modules, CON family, Output modules, DIN rail modules, Lights, Dimmer, Dali, Integrations, LED lights, RGBW lights

Integration with a ZigBee protocol

This guide describes the possibility of integrating with the ZigBee protocol using a gateway connected to the USB port of a module from the M-SERV family.

Last update March 19, 2025, tags: Configuration, Integrations, Node-RED, SERV family

M-CON-KNX-s configuration guide

This document explains the process of configuring the M-CON-KNX-s module to integrate it with the KNX bus.

Last update March 14, 2025, tags: Configuration, Integrations, Ampio Designer

M-CON-KNX-s: KNX integration module MKNX-1s

Module M-CON-KNX-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module enables two-way communication between devices operating within the CAN and KNX bus.

Last update March 14, 2025, tags: Ampio CAN modules, CON family, DIN rail modules, Lights, Dimmer, KNX, Integrations

M-CON-485-s: RS-485 integration module

Module M-CON-485-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for the integration of devices equipped with an RS-485 communication interface with the Ampio home automation system.

Last update March 6, 2025, tags: Ampio CAN modules, CON family, Sensors, DIN rail modules, Integrations, RS-485, Air conditioning, Modbus

M-OUT-4s: Module with four voltage analogue outputs

Module M-OUT-4s is a component of the Ampio system. Required voltage to power the module is 12 — 16V DC. The module is controlled via CAN bus. The module has four voltage analogue outputs. Voltage analogue outputs Voltage analogue outputs allow for integration with devices that have voltage control inputs compatible with the 0 — 10V DC, 1 — 10V DC, 0 — 5V DC standard, e.

Last update February 18, 2025, tags: Ampio CAN modules, OUT family, Output modules, DIN rail modules, Integrations