CON family - Ampio - Knowledge Base

M-CON-DL-s: DALI bus Integration module MDALI-1s, M-CON-DALI-s

Module M-CON-DL-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is intended for integration with lighting with a Dali interface. Dali is the main lighting used in industrial halls, large-format supermarkets and with the ongoing rapid development of automation systems, also in residential buildings.

Last update August 26, 2024, tags: Ampio CAN modules, CON family, Output modules, DIN rail modules, Lights, Dimmer, Dali, Integrations, LED lights, RGBW lights

M-CON-KEY-p: Module for integrating access control systems

Module M-CON-KEY-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has four OC binary outputs. Typical application Integration of access control modules via the Wiegand bus.

Last update August 7, 2024, tags: Ampio CAN modules, CON family, Integrations, Output modules, Junction box modules

M-CON-232-s: RS-232 integration module

Module M-CON-232-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for the integration of devices equipped with an RS-232 communication interface with the Ampio home automation system.

Last update March 21, 2024, tags: Ampio CAN modules, CON family, Sensors, SATEL, Security, DIN rail modules, Integrations, RS-232, Air conditioning, Weather station

M-CON-IR: IR integration module MIR

Module M-CON-IR is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is used for IR integration. With the use of the module, it is possible to receive commands from remote controls based on the NEC protocol, and to send previously saved commands to external devices.

Last update March 21, 2024, tags: Ampio CAN modules, CON family, Output modules, Integrations, Personalisation, Air conditioning

M-CON-ENOCN-p: EnOcean integration module EnOcean-1p

Module M-CON-ENOCN-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is used for integration with devices that support the EnOcean 868Mhz wireless communication standard.

Last update March 21, 2024, tags: Ampio CAN modules, CON family, Junction box modules, EnOcean, Integrations

M-CON-485-s: RS-485 integration module

Module M-CON-485-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for the integration of devices equipped with an RS-485 communication interface with the Ampio home automation system.

Last update October 25, 2023, tags: Ampio CAN modules, CON family, Sensors, DIN rail modules, Integrations, RS-485, Air conditioning, Weather station, Modbus

M-CON-ZWAVE-s: Z-Wave integration module MZWAVE-1s

Module M-CON-ZWAVE-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for integration with a number of devices that support the Z-Wave wireless communication protocol.

Last update September 26, 2023, tags: Ampio CAN modules, CON family, Sensors, Wall switch, Central heating, DIN rail modules, Integrations

M-CON-WL-p: Ampio LoRa base station module

Module M-CON-WL-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module acts as a base station for wireless modules that communicate using the Ampio LoRa technology

Last update July 27, 2022, tags: Ampio CAN modules, CON family, Junction box modules, LoRa

M-CON-KNX-s: KNX integration module MKNX-1s

Module M-CON-KNX-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module enables two-way communication between devices operating within the CAN and KNX bus.

Last update February 23, 2022, tags: Ampio CAN modules, CON family, DIN rail modules, Lights, Dimmer, KNX, Integrations

M-CON-CAN-s: Bus galvanic separator

Module M-CON-CAN-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module allows for galvanic separation of two CAN bus segments. This may be useful, for example, to separate the bus section serving devices installed outside the building from the main bus part, or to separate sections of the installation between which there may be a ground potential difference.

Last update February 23, 2022, tags: Ampio CAN modules, CON family, DIN rail modules

CON family tag