Module M-CON-ZWAVE-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for integration with a number of devices that support the Z-Wave wireless communication protocol.
Last update April 21, 2026, tags: Ampio CAN modules, CON family, Sensors, Wall switch, Central heating, DIN rail modules, Integrations
Module M-SERV-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-SERV-s module is a communication gateway for Ampio mobile applications - both within the local network and via the Ampio Cloud platform - and it enables IP integrations.
Last update April 21, 2026, tags: Ampio CAN modules, SERV family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, OWA lighting, LED lights, Open-collector drivers, Central heating, SATEL, Ampio Cloud, IP, Mobile app, Hotel, Node-RED, Roller shutters and blinds, RS-232, Security
Module M-SERV-MINI-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-SERV-MINI-s module is a communication gateway for Ampio mobile applications - both within the local network and via the Ampio Cloud platform - and enables IP integrations.
Last update April 21, 2026, tags: Ampio CAN modules, SERV family, Output modules, DIN rail modules, Integrations, Ampio Cloud, IP, Mobile app, Node-RED, Open-collector drivers, Central heating
Module M-IN-PTK3p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has three platinum PT1000 temperature sensors inputs. PT1000 inputs The module has inputs that allow for measuring the temperature with the use of platinum PT1000 sensors.
Last update April 21, 2026, tags: Ampio CAN modules, IN family, Sensors, Input modules, Central heating, Junction box modules
Module M-IN-TCD3p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has three inputs for NTC temperature sensors with a resistance within the range of 5-20kΩ at 25°C.
Last update April 21, 2026, tags: Ampio CAN modules, IN family, Sensors, Input modules, Central heating, Junction box modules
Module M-OC-32s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has thirty-two two-state OC outputs. Bi-state OC outputs The module has open-collector outputs allowing for switching of resistive loads supplied with voltage up to 40V DC.
Last update April 21, 2026, tags: Ampio CAN modules, OC family, Output modules, DIN rail modules, Lights, LED lights, Open-collector drivers, Central heating
Module M-OC-4s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has four OC outputs and supports the functionality of an RGBW lighting controller.
Last update April 21, 2026, tags: CCT, Ampio CAN modules, OC family, Output modules, DIN rail modules, Lights, LED lights, RGBW lights, Open-collector drivers, Central heating
Module M-INOC-4p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has four ground-detecting inputs, four OC outputs, and a 1-Wire interface. It also supports the functionality of the RGBW lighting controller.
Last update April 21, 2026, tags: CCT, Ampio CAN modules, IN family, OC family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Junction box modules, Lights, LED lights, RGBW lights, Open-collector drivers, Central heating
Module M-OC-C8s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eight OC outputs, four ground-detecting inputs and supports the functionality of an RGBW lighting controller.
Last update April 21, 2026, tags: CCT, Ampio CAN modules, OC family, Integrations, Output modules, DIN rail modules, Lights, LED lights, RGBW lights, Open-collector drivers, Central heating, Security, Wall switch
Module M-INOC-8s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eight ground-detecting inputs, eight OC outputs, and a 1-Wire interface.
Last update April 21, 2026, tags: CCT, Ampio CAN modules, IN family, OC family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, DIN rail modules, Lights, LED lights, Open-collector drivers, Central heating