Lights tag


Configuration guide for M-INOC and M-OC modules

The following guide describes the configuration of modules from the M-INOC and M-OC family in the Ampio Smart Home configurator.

Last update May 20, 2022, tags: Configuration, Lights, Smart Home configurator

Lighting control - cascading effect

Instructions for configuration of the cascading (stair) effect in lighting.

Last update April 13, 2022, tags: Smart Home configurator, Lights

M-LED-s: Ampio lighting bus controller

Module M-LED-s is a component of the Ampio Smart Home system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module acts as an OWA lighting bus controller. OWA lighting bus The OWA lighting bus (One Wire Ampio) is a solution dedicated to controlling LED lighting.

Last update April 13, 2022, tags: Ampio CAN modules, LED family, DIN rail modules, Output modules, Dimmer, LED lights, Lights, OWA lighting

M-SERV-s: Remote system management and IP integrations module MSERV-4s

Module M-SERV-s is a component of the Ampio Smart Home system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-SERV-s module is a communication gateway for Ampio mobile applications - both within the local network and via the Ampio Cloud platform - and it enables IP integrations.

Last update April 7, 2022, tags: Ampio CAN modules, SERV family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, OWA lighting, LED lights, Open-collector drivers, Central heating, SATEL, Ampio Cloud, IP, Mobile app, Hotel, Node-RED, Roller shutters and blinds, RS-232, Security

M-ROOM-s: Comprehensive apartment administration module MultiRoom-1s

Module M-ROOM-s is a component of the Ampio Smart Home system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module can provide many of the functionalities envisioned by the Ampio building automation system’s architecture.

Last update April 7, 2022, tags: Ampio CAN modules, ROOM family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, LED lights, Open-collector drivers, Central heating, SATEL, Hotel, Roller shutters and blinds, RS-232, Security

M-REL-C10s: Module with ten relay outputs

Module M-REL-C10s is a component of the Ampio Smart Home system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has ten relay outputs and supports the functionality of a controller for the roller shutters and blinds' drives.

Last update March 16, 2022, tags: Ampio CAN modules, REL family, DIN rail modules, Input modules, Output modules, Relay outputs, Lights, Roller shutters and blinds, Wall switch

M-REL-10s: Module with ten relay outputs

Module M-REL-10s is a component of the Ampio Smart Home system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has ten relay outputs, ten ground-detecting inputs and a 1-Wire interface.

Last update March 16, 2022, tags: Ampio CAN modules, REL family, DIN rail modules, Input modules, Output modules, Relay outputs, Lights, Roller shutters and blinds, Wall switch

M-OC-32s: Module with thirty-two bi-state OC outputs

Module M-OC-32s is a component of the Ampio Smart Home system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has thirty-two two-state OC outputs. Bi-state OC outputs The module has open-collector outputs allowing for switching of resistive loads supplied with voltage up to 40V DC.

Last update March 3, 2022, tags: Ampio CAN modules, OC family, Output modules, DIN rail modules, Lights, LED lights, Open-collector drivers, Central heating

WL-OC-RGBW1p: Wireless RGBW lighting controller RF RGBW-1p

Module WL-OC-RGBW1p is a component of the Ampio Smart Home system. Required voltage to power the module is 11 — 16V DC. The module is controlled via the Ampio LoRa wireless interface. The module has four OC outputs operating in an RGBW lighting controller mode.

Last update February 23, 2022, tags: Ampio LoRa wireless modules, OC family, Junction box modules, Output modules, Lights, LED lights, RGBW lights, Wireless, LoRa

WL-REL-2p: Wireless module with two relay outputs RF PR-2p

Module WL-REL-2p is a component of the Ampio Smart Home system. Required voltage to power the module is 110 — 250V AC. The module is controlled via the Ampio LoRa wireless interface. The module has two relay outputs and two AC inputs.

Last update February 23, 2022, tags: Ampio LoRa wireless modules, REL family, Junction box modules, Input modules, Output modules, Relay outputs, Lights, Wall switch, Wireless, LoRa