Lights - Ampio - Knowledge Base

S-LED-I: Ampio lighting bus current driver

Module S-LED-I is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via OWA lighting bus. The module acts as an OWA lighting bus node driver and allows for smooth brightness adjustment of current-controlled LED lighting with a maximum current consumption of 1A and rated voltage not exceeding 12V DC.

Last update January 12, 2023, tags: OWA lighting bus modules, LED family, Output modules, LED lights, Lights, OWA lighting

M-LED-s: Ampio lighting bus controller

Module M-LED-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module acts as an OWA lighting bus controller. OWA lighting bus The OWA lighting bus (One Wire Ampio) is a solution dedicated to controlling LED lighting.

Last update January 12, 2023, tags: Ampio CAN modules, LED family, DIN rail modules, Output modules, Dimmer, LED lights, Lights, OWA lighting

M-OC-C8s: Module with eight OC outputs and an RGBW controller functionality

Module M-OC-C8s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eight OC outputs, four ground-detecting inputs and supports the functionality of an RGBW lighting controller.

Last update December 5, 2022, tags: Ampio CAN modules, OC family, Integrations, Output modules, DIN rail modules, Lights, LED lights, RGBW lights, Open-collector drivers, Central heating, Security, Wall switch

M-OC-4s: Module with four OC outputs and an RGBW controller functionality MRGBWOC-4s

Module M-OC-4s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has four OC outputs and supports the functionality of an RGBW lighting controller.

Last update July 13, 2022, tags: Ampio CAN modules, OC family, Output modules, DIN rail modules, Lights, LED lights, RGBW lights, Open-collector drivers, Central heating

M-INOC-8s: Module with eight bi-state inputs and eight OC outputs

Module M-INOC-8s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eight ground-detecting inputs, eight OC outputs, and a 1-Wire interface.

Last update July 13, 2022, tags: Ampio CAN modules, IN family, OC family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, DIN rail modules, Lights, LED lights, Open-collector drivers, Central heating

M-DIM-1p: Single output dimmer module

Module M-DIM-1p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has one dimmable output, two ground detecting inputs and a 1-Wire interface.

Last update July 7, 2022, tags: Ampio CAN modules, DIM family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Junction box modules, Lights, Dimmer

Lighting control - cascading effect

Instructions for configuration of the cascading (stair) effect in lighting.

Last update April 13, 2022, tags: Smart Home configurator, Lights

WL-OC-RGBW1p: Wireless RGBW lighting controller RF RGBW-1p

Module WL-OC-RGBW1p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via the Ampio LoRa wireless interface. The module has four OC outputs operating in an RGBW lighting controller mode.

Last update February 23, 2022, tags: Ampio LoRa wireless modules, OC family, Junction box modules, Output modules, Lights, LED lights, RGBW lights, Wireless, LoRa

M-DIM-1s: Single output dimmer module Discontinued

Module M-DIM-1s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has one dimmable output. Dimmable outputs With the use of the module, it is possible to control the light intensity of incandescent bulbs, halogens, dimmable LED bulbs and dimmable CFL fluorescent lamps.

Last update February 23, 2022, tags: Ampio CAN modules, DIM family, Output modules, DIN rail modules, Lights, Dimmer

M-CON-KNX-s: KNX integration module MKNX-1s

Module M-CON-KNX-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module enables two-way communication between devices operating within the CAN and KNX bus.

Last update February 23, 2022, tags: Ampio CAN modules, CON family, DIN rail modules, Lights, Dimmer, KNX, Integrations

Lights tag