Display - Ampio - Knowledge Base

M-DOT-15: 15-fields touch panel module with display Discontinued

Module M-DOT-15 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has fifteen sensor fields, a display and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.

Last update April 15, 2024, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Display, Input modules, Wall switch, Touch panels, Personalisation

M-DOT-M6: 6-fields touch panel module with a display MDOT-M4, MDOT-M4+

Module M-DOT-M6 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has six sensor fields, a display supporting the functionality of swipeable screens, and a 1-Wire interface.

Last update April 8, 2022, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Display, Data visualisation, Wall switch, Touch panels, Personalisation

Configuration of a heating multizone

In the Ampio system, there is a possibility of managing multiple heating zones in a building with the use of only one touch panel. The following guide describes the process of configuring such a functionality.

Last update April 6, 2022, tags: Configuration, Smart Home configurator, Temperature control, Central heating, Display

Displaying the temperature on the touch panel's screen

Touch panels with a built-in display can show both the current temperature, as well as the room’s set temperature using one object. The following guide describes how such a functionality should be configured.

Last update April 5, 2022, tags: Smart Home configurator, Display, RT family, DOT family, Temperature control

M-DOT-6: 6-fields touch panel module with a display

Module M-DOT-6 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has six sensor fields, a display and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.

Last update February 23, 2022, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Display, Data visualisation, Wall switch, Touch panels, Personalisation

M-DOT-M18: 18-fields touch panel module with a display

Module M-DOT-M18 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eighteen sensor fields, a display supporting the functionality of swipeable screens, and a 1-Wire interface.

Last update February 23, 2022, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Display, Data visualisation, Wall switch, Touch panels, Personalisation, Security, Access control