Central heating - Ampio - Knowledge Base

M-ROOM-s: Comprehensive apartment administration module MultiRoom-1s Discontinued

Module M-ROOM-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module can provide many of the functionalities envisioned by the Ampio building automation system’s architecture.

Last update April 21, 2026, tags: Ampio CAN modules, ROOM family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, LED lights, Open-collector drivers, Central heating, SATEL, Hotel, Roller shutters and blinds, RS-232, Security

M-ROOM-s PRO: Comprehensive apartment administration module

Module M-ROOM-s PRO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module can provide many of the functionalities envisioned by the Ampio building automation system’s architecture.

Last update April 21, 2026, tags: Ampio CAN modules, ROOM family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, LED lights, Open-collector drivers, Central heating, SATEL, Hotel, Roller shutters and blinds, RS-232, RS-485, Security

M-LED-p: Ampio lighting bus controller

Module M-LED-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module acts as an OWA lighting bus controller. It also has four ground-detecting inputs and a 1-Wire interface.

Last update April 21, 2026, tags: Ampio CAN modules, LED family, Junction box modules, Wall switch, Sensors, Input modules, Output modules, Dallas 18B20, Dimmer, LED lights, Lights, OWA lighting, Central heating

M-SERV-NANO PRO: Remote management module in the form of an industrial computer

The diagrams and visualisations in the M-SERV-NANO PRO module documentation are for illustrative purposes only. Each project is considered individually and tailored to the customer’s requirements. The M-SERV-NANO PRO module is part of the Ampio system. The module is powered from the server’s USB port and a CAN bus cable in the range of 11-16V DC.

Last update December 15, 2025, tags: Ampio CAN modules, SERV family, Integrations, Ampio Cloud, IP, Mobile app, Node-RED, Central heating

M-RT-s module configuration guide

The M-RT-s module is used to control heating zones in a building. This guide describes its configuration in the Ampio environment.

Last update October 9, 2024, tags: Configuration, Central heating, Ampio Designer, Mobile app, RT family

Configuration of a heating multizone

In the Ampio system, there is a possibility of managing multiple heating zones in a building with the use of only one touch panel. The following guide describes the process of configuring such a functionality.

Last update October 9, 2024, tags: Configuration, Ampio Designer, Temperature control, Central heating, Display, DOT family, Touch panels

M-RT-s: Temperature control module

Module M-RT-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for the implementation of temperature control logic. Regulation is performed independently for a number of defined zones.

Last update April 15, 2024, tags: Ampio CAN modules, RT family, DIN rail modules, Air conditioning, Central heating, Temperature control

Initiating the "departure" mode in a heating zone

The following guide describes the configuration of a departure mode triggered in a heating zone, which can be activated by holding in a touch field on the touch panel.

Last update April 11, 2022, tags: Configuration, Central heating, Smart Home configurator

Central heating tag