You will find a lot of valuable information in the form of tutorials, sample configurations carried out step by step, ways of connecting devices, etc.
The M-RT-s module is used to control heating zones in a building. This guide describes its configuration in the Ampio environment.
Last update January 8, 2024, tags: Configuration, Central heating, Ampio Designer, Mobile app
A guide to performing the first configuration of M-SERV family modules
Last update November 27, 2023, tags: SERV family, Configuration, IP, Integrations
A guide that describes the basics of connecting the Ampio modules in a smart building installation.
Last update October 30, 2023, tags: Installation, DIN rail modules, DOT family, RDN family, Wall switch
The guide describes a configuration example for lighting in the Ampio Designer software.
Last update October 27, 2023, tags: SERV family, Configuration, Ampio Designer
Guide about setting roller blinds position related to sun position.
Last update September 5, 2023, tags: Integrations
A configuration guide for the integration of the Ampio system with the F&F LE-03MW CT electricity meter.
Last update May 22, 2023, tags: Smart Home configurator, Modbus
This document explains the process of configuring the M-CON-KNX-s module to integrate it with the KNX bus.
Last update February 20, 2023, tags: Configuration, Smart Home configurator, Integrations
A guide for the integration of Gerda’s tedee locks with the Ampio system.
Last update January 30, 2023, tags: SERV family, Integrations, Configuration, IP, Mobile app, Access control