Ampio CAN modules tag


M-DIM-1s: Single output dimmer module Discontinued

Module M-DIM-1s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has one dimmable output. Dimmable outputs With the use of the module, it is possible to control the light intensity of incandescent bulbs, halogens, dimmable LED bulbs and dimmable CFL fluorescent lamps.

Last update February 23, 2022, tags: Ampio CAN modules, DIM family, Output modules, DIN rail modules, Lights, Dimmer

M-IN-AC4s: Module with four AC inputs

Module M-IN-AC4s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has four AC inputs. AC inputs The module has inputs that go into an active state when they are connected to an alternating voltage in the range of 110 — 250V AC.

Last update February 23, 2022, tags: Ampio CAN modules, IN family, DIN rail modules, Input modules

M-IN-8s: Module with eight bi-state inputs

Module M-IN-8s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eight ground detecting inputs, eight LED outputs and a 1-Wire interface.

Last update February 23, 2022, tags: Ampio CAN modules, IN family, DIN rail modules, Wall switch, Sensors, Input modules

M-CON-KNX-s: KNX integration module MKNX-1s

Module M-CON-KNX-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module enables two-way communication between devices operating within the CAN and KNX bus.

Last update February 23, 2022, tags: Ampio CAN modules, CON family, DIN rail modules, Lights, Dimmer, KNX, Integrations

M-CON-IR: IR integration module MIR

Module M-CON-IR is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is used for IR integration. With the use of the module, it is possible to receive commands from remote controls based on the NEC protocol, and to send previously saved commands to external devices.

Last update February 23, 2022, tags: Ampio CAN modules, CON family, Output modules, Integrations, Personalisation, Air conditioning

M-DOT-GEST: Gesture recognition module MGEST-1

Module M-DOT-GEST is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module recognises hand gestures made in the proximity of its surface, as well as touch gestures on the glass front.

Last update February 23, 2022, tags: Ampio CAN modules, DOT family, Wall switch, Sensors, Dallas 18B20, Input modules

M-DIM-2s: Dimmer module with two outputs

Module M-DIM-2s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has two dimmable outputs. In the standard version of the module, the maximum power of the receiver connected to a single output is 150W.

Last update February 23, 2022, tags: Ampio CAN modules, DIM family, Output modules, DIN rail modules, Lights, Dimmer

M-CON-DALI-s: DALI bus Integration module MDALI-1s

Module M-CON-DALI-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is intended for integration with lighting with a Dali interface. Dali is the main lighting used in industrial halls, large-format supermarkets and with the ongoing rapid development of automation systems, also in residential buildings.

Last update February 23, 2022, tags: Ampio CAN modules, CON family, Output modules, DIN rail modules, Lights, Dimmer, Dali, Integrations, LED lights, RGBW lights

M-CON-CAN-s: Bus galvanic separator

Module M-CON-CAN-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module allows for galvanic separation of two CAN bus segments. This may be useful, for example, to separate the bus section serving devices installed outside the building from the main bus part, or to separate sections of the installation between which there may be a ground potential difference.

Last update February 23, 2022, tags: Ampio CAN modules, CON family, DIN rail modules

M-AV-MP3-s: Audio file player module MP3-PLAYER

Module M-AV-MP3-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows you to play audio files from an installed microSD card. It has an audio output that can be connected to the M-AV-AMP-s bus receiver module or other power amplifier.

Last update February 23, 2022, tags: Ampio CAN modules, AV family, Output modules, DIN rail modules