Ampio CAN modules tag

  1. Knowledge Base
  2. Tags
  3. Ampio CAN modules

M-LED-p: Ampio lighting bus controller

Module M-LED-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module acts as an OWA lighting bus controller. It also has four ground-detecting inputs and a 1-Wire interface.

Last update April 21, 2026, tags: Ampio CAN modules, LED family, Junction box modules, Wall switch, Sensors, Input modules, Output modules, Dallas 18B20, Dimmer, LED lights, Lights, OWA lighting, Central heating

M-ALARM-8s: Alarm control panel with eight alarm inputs

Module M-ALARM-8s is a component of the Ampio system. Required voltage to power the module is 18 — 24V DC. The module is controlled via CAN bus. The M-ALARM-8s module has the functionality of a control panel, with eight alarm inputs, two power outputs and six binary OC outputs.

Last update April 21, 2026, tags: Ampio CAN modules, ALARM family, DIN rail modules, Security, Access control

M-RT-s: Temperature control module

Module M-RT-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for the implementation of temperature control logic. Regulation is performed independently for a number of defined zones.

Last update April 15, 2024, tags: Ampio CAN modules, RT family, DIN rail modules, Air conditioning, Central heating, Temperature control

M-IN-2p: Module with two bi-state inputs

Module M-IN-2p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has two ground detecting inputs, a 1-Wire interface and a brightness sensor.

Last update November 2, 2023, tags: Ampio CAN modules, IN family, Junction box modules, Wall switch, Sensors, Input modules, Dallas 18B20

M-METEO: Weather station Discontinued

Module M-METEO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. It is controlled via the RS-485 interface using the Modbus RTU protocol. Each M-METEO weather station comes with an M-CON-485 module, which enables the device to work with the CAN bus of Ampio building automation system.

Last update February 23, 2022, tags: Ampio CAN modules, METEO family, Input modules, Sensors, Weather station, RS-485, Modbus

All rights reserved © 2026 ampio.com