Ampio CAN modules - Ampio - Knowledge Base

M-OC-32s: Module with thirty-two bi-state OC outputs

Module M-OC-32s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has thirty-two two-state OC outputs. Bi-state OC outputs The module has open-collector outputs allowing for switching of resistive loads supplied with voltage up to 40V DC.

Last update April 15, 2024, tags: Ampio CAN modules, OC family, Output modules, DIN rail modules, Lights, LED lights, Open-collector drivers, Central heating

M-OUT-4p: Module with four voltage analogue outputs and inputs

Module M-OUT-4p is a component of the Ampio system. Required voltage to power the module is 12 — 16V DC. The module is controlled via CAN bus. The module has four voltage analogue outputs, four analogue inputs and a 1-Wire interface.

Last update April 15, 2024, tags: Ampio CAN modules, OUT family, Output modules, Junction box modules, Input modules, Integrations, Dallas 18B20

M-IN-11p: Module with eleven bi-state inputs

Module M-IN-11p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eleven voltage-detecting inputs, eleven LED outputs, and a 1-Wire interface.

Last update April 15, 2024, tags: Ampio CAN modules, IN family, Junction box modules, Wall switch, Sensors, Input modules, Dallas 18B20

M-IN-8s: Module with eight bi-state inputs

Module M-IN-8s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eight ground detecting inputs, eight LED outputs and a 1-Wire interface.

Last update April 15, 2024, tags: Ampio CAN modules, IN family, DIN rail modules, Wall switch, Sensors, Input modules

M-IN-AD8s: Module with eight analogue inputs

Module M-IN-AD8s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eight analogue inputs. Analogue inputs The module has inputs that allow for voltage measurement in the range of 0 — 10V DC.

Last update April 15, 2024, tags: Ampio CAN modules, IN family, DIN rail modules, Input modules, Analogue control

M-RDN-5s: Five-bus power redundancy module

Module M-RDN-5s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module enables powering the CAN bus in a redundant manner with the use of two independent power supplies.

Last update April 15, 2024, tags: Ampio CAN modules, RDN family, DIN rail modules, Security

M-DOT-15: 15-fields touch panel module with display Discontinued

Module M-DOT-15 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has fifteen sensor fields, a display and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.

Last update April 15, 2024, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Display, Input modules, Wall switch, Touch panels, Personalisation

M-DOT-R14: 14-fields touch panel module with an RFID reader

Module M-DOT-R14 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has fourteen sensor fields, an RFID card reader and a 1-Wire interface.

Last update April 15, 2024, tags: Ampio CAN modules, DOT family, Input modules, Wall switch, Touch panels, Personalisation, Security, Access control, RFID

M-CON-232-s: RS-232 integration module

Module M-CON-232-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for the integration of devices equipped with an RS-232 communication interface with the Ampio home automation system.

Last update March 21, 2024, tags: Ampio CAN modules, CON family, Sensors, SATEL, Security, DIN rail modules, Integrations, RS-232, Air conditioning, Weather station

M-CON-IR: IR integration module MIR

Module M-CON-IR is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is used for IR integration. With the use of the module, it is possible to receive commands from remote controls based on the NEC protocol, and to send previously saved commands to external devices.

Last update March 21, 2024, tags: Ampio CAN modules, CON family, Output modules, Integrations, Personalisation, Air conditioning

Ampio CAN modules tag