Audio connection with an intercom via SIP
SIP configuration instructions using Akuvox and Doorbird intercoms as examples
Last update July 3, 2024, tags: SERV family, Integrations, Configuration, IP, Mobile app, Ampio Designer, DoorBird, Intercom
SIP configuration instructions using Akuvox and Doorbird intercoms as examples
Last update July 3, 2024, tags: SERV family, Integrations, Configuration, IP, Mobile app, Ampio Designer, DoorBird, Intercom
A guide to changing touch panel brightness settings dependent on sunrise/sunset.
Last update July 1, 2024, tags: DOT family, Personalisation, Ampio Designer, Touch panels, RT family, SERV family
This guide describes the possibility of integrating with the ZigBee protocol using a gateway connected to the USB port of a module from the M-SERV family.
Last update June 17, 2024, tags: Configuration, Integrations, Node-RED, SERV family
A guide that provides general information about the Ampio installer kit and describes basic configuration that can be carried out with it.
Last update April 30, 2024, tags: Configuration, Dallas 18B20, Ampio Designer, Touch panels, SERV family
Module M-SERV-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-SERV-s module is a communication gateway for Ampio mobile applications - both within the local network and via the Ampio Cloud platform - and it enables IP integrations.
Last update April 24, 2024, tags: Ampio CAN modules, SERV family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, OWA lighting, LED lights, Open-collector drivers, Central heating, SATEL, Ampio Cloud, IP, Mobile app, Hotel, Node-RED, Roller shutters and blinds, RS-232, Security
The guide describes a procedure of updating the SD card image in an M-SERV family module.
Last update April 2, 2024, tags: SERV family, Configuration, Ampio Designer
A guide to performing the first configuration of M-SERV family modules
Last update November 27, 2023, tags: SERV family, Configuration, IP, Integrations
The guide describes a configuration example for lighting in the Ampio Designer software.
Last update October 27, 2023, tags: SERV family, Configuration, Ampio Designer
Module M-SERV-3s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-SERV-3s module is a communication gateway for Ampio mobile applications - both within the local network and via the Ampio Cloud platform - plus, it enables IP integrations.
Last update September 7, 2023, tags: Ampio CAN modules, SERV family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, Ampio Cloud, IP, Mobile app, Hotel, Node-RED, Roller shutters and blinds, LoRa
A guide for the integration of Gerda’s tedee locks with the Ampio system.
Last update January 30, 2023, tags: SERV family, Integrations, Configuration, IP, Mobile app, Access control