DALI integration
A guide for the integration of Ampio with the DALI system.
Last update October 9, 2024, tags: Lights, Dimmer, Dali, Integrations, Configuration, Ampio Designer
A guide for the integration of Ampio with the DALI system.
Last update October 9, 2024, tags: Lights, Dimmer, Dali, Integrations, Configuration, Ampio Designer
A guide that describes the steps of integrating the Ampio system with the Satel-Integra alarm with the use of the M-CON-232-s and M-SERV-s modules.
Last update October 9, 2024, tags: Smart Home configurator, Access control, Ampio Designer, Integrations, RS-232
A description of the configuration of integration software with the majority of devices supporting the MODBUS RS485 protocol
Last update October 9, 2024, tags: Configuration, Integrations, RS-485, Modbus, Smart Home configurator, Ampio Designer
Introduction to the use of virtual devices in Ampio projects and a summary of their capabilities.
Last update October 2, 2024, tags: Ampio Designer, Configuration, Smart Home configurator, Node-RED, Integrations, Temperature control, Automations
Module M-CON-DL-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is intended for integration with lighting with a Dali interface. Dali is the main lighting used in industrial halls, large-format supermarkets and with the ongoing rapid development of automation systems, also in residential buildings.
Last update August 26, 2024, tags: Ampio CAN modules, CON family, Output modules, DIN rail modules, Lights, Dimmer, Dali, Integrations, LED lights, RGBW lights
SIP configuration instructions using Akuvox and Doorbird intercoms as examples
Last update August 2, 2024, tags: SERV family, Integrations, Configuration, IP, Mobile app, Ampio Designer, DoorBird, Intercom
Module M-ROOM-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module can provide many of the functionalities envisioned by the Ampio building automation system’s architecture.
Last update July 29, 2024, tags: Ampio CAN modules, ROOM family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, LED lights, Open-collector drivers, Central heating, SATEL, Hotel, Roller shutters and blinds, RS-232, Security
Module M-ROOM-s PRO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module can provide many of the functionalities envisioned by the Ampio building automation system’s architecture.
Last update July 29, 2024, tags: Ampio CAN modules, ROOM family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, LED lights, Open-collector drivers, Central heating, SATEL, Hotel, Roller shutters and blinds, RS-232, Security