Node-RED tag

  1. Knowledge Base
  2. Tags
  3. Node-RED

M-SERV-s: Remote system management and IP integrations module MSERV-4s

Module M-SERV-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-SERV-s module is a communication gateway for Ampio mobile applications - both within the local network and via the Ampio Cloud platform - and it enables IP integrations.

Last update October 29, 2024, tags: Ampio CAN modules, SERV family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, OWA lighting, LED lights, Open-collector drivers, Central heating, SATEL, Ampio Cloud, IP, Mobile app, Hotel, Node-RED, Roller shutters and blinds, RS-232, Security

M-SERV-MINI-s: Remote system management and IP integrations module

Module M-SERV-MINI-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-SERV-MINI-s module is a communication gateway for Ampio mobile applications - both within the local network and via the Ampio Cloud platform - and enables IP integrations.

Last update October 29, 2024, tags: Ampio CAN modules, SERV family, Output modules, DIN rail modules, Integrations, Ampio Cloud, IP, Mobile app, Node-RED, Open-collector drivers, Central heating

M-SERV-3s: Remote system management and IP integrations module Discontinued

Module M-SERV-3s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-SERV-3s module is a communication gateway for Ampio mobile applications - both within the local network and via the Ampio Cloud platform - plus, it enables IP integrations.

Last update October 29, 2024, tags: Ampio CAN modules, SERV family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, Ampio Cloud, IP, Mobile app, Hotel, Node-RED, Roller shutters and blinds, LoRa

Manual updates

Some updates on the Ampio system can be initiated manually. The following guide describes the procedure for such updates.

Last update October 9, 2024, tags: Configuration, Mobile app, Ampio Designer, Node-RED, Smart Home configurator, Smart Home Manager

Virtual devices

Introduction to the use of virtual devices in Ampio projects and a summary of their capabilities.

Last update October 2, 2024, tags: Ampio Designer, Configuration, Smart Home configurator, Node-RED, Integrations, Temperature control, Automations

Integration with a ZigBee protocol

This guide describes the possibility of integrating with the ZigBee protocol using a gateway connected to the USB port of a module from the M-SERV family.

Last update June 17, 2024, tags: Configuration, Integrations, Node-RED, SERV family

Integration of the Ampio system with Node-RED

A guide for the integration of the Ampio system with Node-RED, either via predefined nodes, or an MQTT broker.

Last update March 20, 2024, tags: Automations, Configuration, Integrations, IP, Node-RED

Integration with NETIO PowerPDU

This guide explains the process of integrating NETIO’s smart power distribution unit with the Ampio system.

Last update October 6, 2022, tags: Integrations, Node-RED, Input modules, IP, Smart Home Manager

Integration with glow.ly LED strips' drivers

This guide explains the process of integrating glow.ly LED strips with the Ampio system.

Last update May 18, 2022, tags: Integrations, LED lights, Node-RED

All rights reserved © 2024 ampio.com