Module M-IN-AD8s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eight analogue inputs. Analogue inputs The module has inputs that allow for voltage measurement in the range of 0 — 10V DC.
Last update April 15, 2024, tags: Ampio CAN modules, IN family, DIN rail modules, Input modules, Analogue control
Module M-RDN-5s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module enables powering the CAN bus in a redundant manner with the use of two independent power supplies.
Last update April 15, 2024, tags: Ampio CAN modules, RDN family, DIN rail modules, Security
Module M-CON-232-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for the integration of devices equipped with an RS-232 communication interface with the Ampio home automation system.
Last update March 21, 2024, tags: Ampio CAN modules, CON family, Sensors, SATEL, Security, DIN rail modules, Integrations, RS-232, Air conditioning, Weather station
Module M-AV-AMP-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. Adding the module to the Ampio installation makes it possible to play music automatically when someone enters the house, or lower the volume after a certain hour.
Last update March 21, 2024, tags: Ampio CAN modules, AV family, Output modules, Integrations, DIN rail modules
Module M-AV-MP3-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows you to play audio files from an installed microSD card. It has an audio output that can be connected to the M-AV-MP3-s bus receiver module or other power amplifier.
Last update March 21, 2024, tags: Ampio CAN modules, AV family, Output modules, DIN rail modules
Module M-IN-16s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has sixteen alarm inputs. Alarm inputs The module has bi-state inputs that go into an active state when they are shorted to ground, allowing for the connection of any devices with potential-free contact outputs or optocoupler outputs.
Last update March 20, 2024, tags: Ampio CAN modules, IN family, DIN rail modules, Wall switch, Input modules
A guide that describes the basics of connecting the Ampio modules in a smart building installation.
Last update October 30, 2023, tags: Installation, DIN rail modules, DOT family, RDN family, Wall switch
Module M-CON-ZWAVE-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for integration with a number of devices that support the Z-Wave wireless communication protocol.
Last update September 26, 2023, tags: Ampio CAN modules, CON family, Sensors, Wall switch, Central heating, DIN rail modules, Integrations
Module M-OUT-4s is a component of the Ampio system. Required voltage to power the module is 12 — 16V DC. The module is controlled via CAN bus. The module has four voltage analogue outputs. Voltage analogue outputs Voltage analogue outputs allow for integration with devices that have voltage control inputs compatible with the 0 — 10V DC, 1 — 10V DC, 0 — 5V DC standard, e.
Last update April 8, 2022, tags: Ampio CAN modules, OUT family, Output modules, DIN rail modules, Integrations
Module M-DIM-1s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has one dimmable output. Dimmable outputs With the use of the module, it is possible to control the light intensity of incandescent bulbs, halogens, dimmable LED bulbs and dimmable CFL fluorescent lamps.
Last update February 23, 2022, tags: Ampio CAN modules, DIM family, Output modules, DIN rail modules, Lights, Dimmer