Technical information about Ampio modules.
Module M-AV-AMP-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. Adding the module to the Ampio installation makes it possible to play music automatically when someone enters the house, or lower the volume after a certain hour.
Last update March 21, 2024, tags: Ampio CAN modules, AV family, Output modules, Integrations, DIN rail modules
Module M-AV-MP3-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows you to play audio files from an installed microSD card. It has an audio output that can be connected to the M-AV-MP3-s bus receiver module or other power amplifier.
Last update March 21, 2024, tags: Ampio CAN modules, AV family, Output modules, DIN rail modules
Module M-CON-232-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for the integration of devices equipped with an RS-232 communication interface with the Ampio home automation system.
Last update March 21, 2024, tags: Ampio CAN modules, CON family, Sensors, SATEL, Security, DIN rail modules, Integrations, RS-232, Air conditioning, Weather station
Module M-CON-485-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for the integration of devices equipped with an RS-485 communication interface with the Ampio home automation system.
Last update October 25, 2023, tags: Ampio CAN modules, CON family, Sensors, DIN rail modules, Integrations, RS-485, Air conditioning, Weather station, Modbus
Module M-CON-CAN-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module allows for galvanic separation of two CAN bus segments. This may be useful, for example, to separate the bus section serving devices installed outside the building from the main bus part, or to separate sections of the installation between which there may be a ground potential difference.
Last update February 23, 2022, tags: Ampio CAN modules, CON family, DIN rail modules
Module M-CON-DL-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is intended for integration with lighting with a Dali interface. Dali is the main lighting used in industrial halls, large-format supermarkets and with the ongoing rapid development of automation systems, also in residential buildings.
Last update February 22, 2024, tags: Ampio CAN modules, CON family, Output modules, DIN rail modules, Lights, Dimmer, Dali, Integrations, LED lights, RGBW lights
Module M-CON-ENOCN-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is used for integration with devices that support the EnOcean 868Mhz wireless communication standard.
Last update March 21, 2024, tags: Ampio CAN modules, CON family, Junction box modules, EnOcean, Integrations
Module M-CON-IR is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is used for IR integration. With the use of the module, it is possible to receive commands from remote controls based on the NEC protocol, and to send previously saved commands to external devices.
Last update March 21, 2024, tags: Ampio CAN modules, CON family, Output modules, Integrations, Personalisation, Air conditioning
Module M-CON-KNX-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module enables two-way communication between devices operating within the CAN and KNX bus.
Last update February 23, 2022, tags: Ampio CAN modules, CON family, DIN rail modules, Lights, Dimmer, KNX, Integrations
Module M-CON-WL-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module acts as a base station for wireless modules that communicate using the Ampio LoRa technology
Last update July 27, 2022, tags: Ampio CAN modules, CON family, Junction box modules, LoRa