Input modules - Ampio - Knowledge Base

M-DOT-R2 PRO: 2-field touch panel module with RFID reader

Module M-DOT-R2 PRO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-DOT-R2 PRO module is available for sale by special order. The minimum order for the R PRO series is 10 items.

Last update February 19, 2026, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Wall switch, Touch panels, Personalisation, Security, Access control, RFID

M-DOT-T6: 6-field touchscreen panel module

Module M-DOT-T6 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has six touch-sensitive fields and a configurable touch display, as well as a 1-Wire interface.

Last update January 5, 2026, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Display, Data visualisation, Wall switch, Touch panels, Personalisation, Access control

M-SERV-s: Remote system management and IP integrations module MSERV-4s

Module M-SERV-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-SERV-s module is a communication gateway for Ampio mobile applications - both within the local network and via the Ampio Cloud platform - and it enables IP integrations.

Last update December 11, 2025, tags: Ampio CAN modules, SERV family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, OWA lighting, LED lights, Open-collector drivers, Central heating, SATEL, Ampio Cloud, IP, Mobile app, Hotel, Node-RED, Roller shutters and blinds, RS-232, Security

M-DOT-R14: 14-fields touch panel module with an RFID reader

Module M-DOT-R14 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has fourteen sensor fields, an RFID card reader and a 1-Wire interface.

Last update November 3, 2025, tags: Ampio CAN modules, DOT family, Input modules, Wall switch, Touch panels, Personalisation, Security, Access control, RFID

WL-REL-2p: Wireless module with two relay outputs RF PR-2p

Module WL-REL-2p is a component of the Ampio system. Required voltage to power the module is 110 — 250V AC. The module is controlled via the Ampio LoRa wireless interface. The module has two relay outputs and two AC inputs.

Last update August 22, 2025, tags: Ampio LoRa wireless modules, REL family, Junction box modules, Input modules, Output modules, Relay outputs, Lights, Wall switch, Wireless, LoRa

M-DIM-1p: Single output dimmer module

Module M-DIM-1p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has one dimmable output, two ground detecting inputs and a 1-Wire interface.

Last update August 22, 2025, tags: Ampio CAN modules, DIM family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Junction box modules, Lights, Dimmer

M-REL-2p: Module with two relay outputs MROL-2p

Module M-REL-2p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has two relay outputs, two ground-detecting inputs and a 1-Wire interface. It also supports the functionality of a controller for the roller shutters and blinds' drives.

Last update August 22, 2025, tags: Ampio CAN modules, REL family, Junction box modules, Input modules, Output modules, Relay outputs, Lights, Roller shutters and blinds, Wall switch

M-REL-C10s: Module with ten relay outputs

Module M-REL-C10s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has ten relay outputs and supports the functionality of a controller for the roller shutters and blinds' drives.

Last update August 22, 2025, tags: Ampio CAN modules, REL family, DIN rail modules, Input modules, Output modules, Relay outputs, Lights, Roller shutters and blinds, Wall switch

M-REL-10s: Module with ten relay outputs

Module M-REL-10s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has ten relay outputs, ten ground-detecting inputs and a 1-Wire interface. It also supports the functionality of a controller for the roller shutters and blinds' drives.