Module M-DOT-R PRO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-DOT-R PRO module is available for sale by special order. RFID card reader The module is equipped with an RFID card reader.
Last update July 10, 2025, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Security, Access control, RFID
A guide to configuring access control in PRO series modules.
Last update July 10, 2025, tags: Access control, Configuration, Ampio Designer, RFID, Security
Module M-DOT-R2 PRO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-DOT-R2 PRO module is available for sale by special order. The module has two sensor fields, an RFID card reader and a 1-Wire interface.
Last update July 10, 2025, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Wall switch, Touch panels, Personalisation, Security, Access control, RFID
Access control configuration guide using the M-DOT-R14 panel as an example.
Last update October 23, 2024, tags: Access control, Configuration, Ampio Designer, Mobile app, RFID, Security
Module M-DOT-R14 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has fourteen sensor fields, an RFID card reader and a 1-Wire interface.
Last update April 15, 2024, tags: Ampio CAN modules, DOT family, Input modules, Wall switch, Touch panels, Personalisation, Security, Access control, RFID