Module M-IN-2p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has two ground detecting inputs, a 1-Wire interface and a brightness sensor.
Last update November 2, 2023, tags: Ampio CAN modules, IN family, Junction box modules, Wall switch, Sensors, Input modules, Dallas 18B20
A guide that describes the basics of connecting the Ampio modules in a smart building installation.
Last update October 30, 2023, tags: Installation, DIN rail modules, DOT family, RDN family, Wall switch
Module M-CON-ZWAVE-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for integration with a number of devices that support the Z-Wave wireless communication protocol.
Last update September 26, 2023, tags: Ampio CAN modules, CON family, Sensors, Wall switch, Central heating, DIN rail modules, Integrations
Module M-DOT-9 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has nine sensor fields and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.
Last update March 7, 2023, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Wall switch, Touch panels, Personalisation
Module M-DIM-1p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has one dimmable output, two ground detecting inputs and a 1-Wire interface.
Last update July 7, 2022, tags: Ampio CAN modules, DIM family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Junction box modules, Lights, Dimmer
Panel Creator is an app that allows designing glass touch panels to navigate system functionalities.
Last update June 15, 2022, tags: Automations, DOT family, Personalisation, Touch panels, Wall switch
Module M-DOT-M6 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has six sensor fields, a display supporting the functionality of swipeable screens, and a 1-Wire interface.
Last update April 8, 2022, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Display, Data visualisation, Wall switch, Touch panels, Personalisation
Module M-DOT-GEST is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module recognises hand gestures made in the proximity of its surface, as well as touch gestures on the glass front.
Last update February 23, 2022, tags: Ampio CAN modules, DOT family, Wall switch, Sensors, Dallas 18B20, Input modules
Module M-DOT-6 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has six sensor fields, a display and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.
Last update February 23, 2022, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Display, Data visualisation, Wall switch, Touch panels, Personalisation
Module M-DOT-4 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has four sensor fields and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.
Last update February 23, 2022, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Wall switch, Touch panels, Personalisation