Wall switch - Ampio - Knowledge Base

M-LED-p: Ampio lighting bus controller

Module M-LED-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module acts as an OWA lighting bus controller. It also has four ground-detecting inputs and a 1-Wire interface.

Last update April 21, 2026, tags: Ampio CAN modules, LED family, Junction box modules, Wall switch, Sensors, Input modules, Output modules, Dallas 18B20, Dimmer, LED lights, Lights, OWA lighting, Central heating

Configuration guide for M-DOT-T6

Configuration instructions for the M-DOT-T6 touchscreen panel.

Last update November 28, 2025, tags: DOT family, Ampio Designer, Configuration, Display, Personalisation, Touch panels, Wall switch

WL-REL-2p: Wireless module with two relay outputs RF PR-2p

Module WL-REL-2p is a component of the Ampio system. Required voltage to power the module is 110 — 250V AC. The module is controlled via the Ampio LoRa wireless interface. The module has two relay outputs and two AC inputs.

Last update August 22, 2025, tags: Ampio LoRa wireless modules, REL family, Junction box modules, Input modules, Output modules, Relay outputs, Lights, Wall switch, Wireless, LoRa

Ampio Panel Creator

Panel Creator is an application that allows you to create personalised glass touch panels used to control your smart home.

Last update March 28, 2025, tags: Automations, DOT family, Personalisation, Touch panels, Wall switch

WL-REL-ROL1p: Wireless roller blinds controller module RF ROL-2p

Module WL-REL-ROL1p is a component of the Ampio system. Required voltage to power the module is 110 — 250V AC. The module is controlled via the Ampio LoRa wireless interface. The module has two AC inputs and two relay outputs in the roller shutter and blinds' drive controller mode.

Last update January 7, 2025, tags: Ampio LoRa wireless modules, REL family, Junction box modules, Input modules, Output modules, Relay outputs, Roller shutters and blinds, Wireless, Wall switch, LoRa

M-IN-2p: Module with two bi-state inputs

Module M-IN-2p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has two ground detecting inputs, a 1-Wire interface and a brightness sensor.

Last update November 2, 2023, tags: Ampio CAN modules, IN family, Junction box modules, Wall switch, Sensors, Input modules, Dallas 18B20

Wall switch tag