Wall switch - Ampio - Knowledge Base

M-REL-C4s: Module with four relay outputs

Module M-REL-C4s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has four relay outputs and four ground-detecting inputs. It also supports the functionality of a controller for the roller shutters and blinds' drives.

Last update July 29, 2024, tags: Ampio CAN modules, REL family, DIN rail modules, Input modules, Output modules, Relay outputs, Lights, Roller shutters and blinds, Wall switch

M-REL-8s: Module with eight relay outputs MROL-8s Discontinued

Module M-REL-8s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eight relay outputs, eight ground-detecting inputs and a 1-Wire interface. It also supports the functionality of a controller for the roller shutters and blinds' drives.

Last update July 29, 2024, tags: Ampio CAN modules, REL family, DIN rail modules, Input modules, Output modules, Relay outputs, Lights, Roller shutters and blinds, Wall switch

M-ROOM-s: Comprehensive apartment administration module MultiRoom-1s Discontinued

Module M-ROOM-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module can provide many of the functionalities envisioned by the Ampio building automation system’s architecture.

Last update July 29, 2024, tags: Ampio CAN modules, ROOM family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, LED lights, Open-collector drivers, Central heating, SATEL, Hotel, Roller shutters and blinds, RS-232, Security

M-ROOM-s PRO: Comprehensive apartment administration module

Module M-ROOM-s PRO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module can provide many of the functionalities envisioned by the Ampio building automation system’s architecture.

Last update July 29, 2024, tags: Ampio CAN modules, ROOM family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, LED lights, Open-collector drivers, Central heating, SATEL, Hotel, Roller shutters and blinds, RS-232, Security

WL-REL-ROL1p: Wireless roller blinds controller module RF ROL-2p

Module WL-REL-ROL1p is a component of the Ampio system. Required voltage to power the module is 110 — 250V AC. The module is controlled via the Ampio LoRa wireless interface. The module has two AC inputs and two relay outputs in the roller shutter and blinds' drive controller mode.

Last update July 9, 2024, tags: Ampio LoRa wireless modules, REL family, Junction box modules, Input modules, Output modules, Relay outputs, Roller shutters and blinds, Wireless, Wall switch, LoRa

M-IN-11p: Module with eleven bi-state inputs

Module M-IN-11p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eleven voltage-detecting inputs, eleven LED outputs, and a 1-Wire interface.

Last update April 15, 2024, tags: Ampio CAN modules, IN family, Junction box modules, Wall switch, Sensors, Input modules, Dallas 18B20

M-IN-8s: Module with eight bi-state inputs

Module M-IN-8s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eight ground detecting inputs, eight LED outputs and a 1-Wire interface.

Last update April 15, 2024, tags: Ampio CAN modules, IN family, DIN rail modules, Wall switch, Sensors, Input modules

M-DOT-15: 15-fields touch panel module with display Discontinued

Module M-DOT-15 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has fifteen sensor fields, a display and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.

Last update April 15, 2024, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Display, Input modules, Wall switch, Touch panels, Personalisation

M-DOT-R14: 14-fields touch panel module with an RFID reader

Module M-DOT-R14 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has fourteen sensor fields, an RFID card reader and a 1-Wire interface.

Last update April 15, 2024, tags: Ampio CAN modules, DOT family, Input modules, Wall switch, Touch panels, Personalisation, Security, Access control, RFID

M-IN-16s: Module with sixteen bi-state inputs

Module M-IN-16s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has sixteen alarm inputs. Alarm inputs The module has bi-state inputs that go into an active state when they are shorted to ground, allowing for the connection of any devices with potential-free contact outputs or optocoupler outputs.

Last update March 20, 2024, tags: Ampio CAN modules, IN family, DIN rail modules, Wall switch, Input modules

Wall switch tag