DOT family - Ampio - Knowledge Base

M-DOT-18: 18-fields touch panel module

Module M-DOT-18 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eighteen sensor fields and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.

Last update April 29, 2026, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Wall switch, Touch panels, Personalisation

M-DOT-15: 15-fields touch panel module with display Discontinued

Module M-DOT-15 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has fifteen sensor fields, a display and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.

Last update April 29, 2026, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Display, Input modules, Wall switch, Touch panels, Personalisation

M-DOT-R14: 14-fields touch panel module with an RFID reader

Module M-DOT-R14 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has fourteen sensor fields, an RFID card reader and a 1-Wire interface.

Last update April 29, 2026, tags: Ampio CAN modules, DOT family, Input modules, Wall switch, Touch panels, Personalisation, Security, Access control, RFID

Installation of a guiding plate for the 2, 4, 6, 9-field panel

Instruction for the installation of a guiding plate for the 2,4,6 and 9-field touch panels.

Last update March 3, 2026, tags: DOT family, Installation

Installation of a guiding plate for the 18-field panel

Instruction for the installation of a guiding plate for the 18-field touch panels.

Last update March 3, 2026, tags: DOT family, Installation

M-DOT-R PRO: Panel module with built-in RFID reader

Module M-DOT-R PRO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-DOT-R PRO module is available for sale by special order. The minimum order for the R PRO series is 10 items.

Last update February 19, 2026, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Security, Access control, RFID

DOT family tag

M-DOT-18: 18-fields touch panel module

M-DOT-15: 15-fields touch panel module with display Discontinued

M-DOT-R14: 14-fields touch panel module with an RFID reader

Installation of a guiding plate for the 2, 4, 6, 9-field panel

Installation of a guiding plate for the 18-field panel

M-DOT-R PRO: Panel module with built-in RFID reader

Configuration guide for M-DOT-T6

Parameter configuration in modules

Ampio Panel Creator

Buzzer notifications in M-DOT modules