Configuration guide for M-DOT-T6
Configuration instructions for the M-DOT-T6 touchscreen panel.
Last update August 21, 2025, tags: DOT family, Ampio Designer, Configuration, Display, Personalisation, Touch panels, Wall switch
Configuration instructions for the M-DOT-T6 touchscreen panel.
Last update August 21, 2025, tags: DOT family, Ampio Designer, Configuration, Display, Personalisation, Touch panels, Wall switch
The M-DOT-T6 module is not available for sale until further notice. Module M-DOT-T6 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has six touch-sensitive fields and a configurable touch display, as well as a 1-Wire interface.
Last update August 18, 2025, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Display, Data visualisation, Wall switch, Touch panels, Personalisation, Access control
A guide that describes the basics of connecting the Ampio modules in a smart building installation.
Last update August 7, 2025, tags: Installation, DIN rail modules, DOT family, RDN family, Wall switch
Guide to configuring parameters in Ampio devices (firmware generation v2.0).
Last update August 7, 2025, tags: Configuration, Ampio Designer, DOT family
Module M-DOT-R PRO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-DOT-R PRO module is available for sale by special order. RFID card reader The module is equipped with an RFID card reader.
Last update July 14, 2025, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Security, Access control, RFID
Module M-DOT-R2 PRO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-DOT-R2 PRO module is available for sale by special order. The module has two sensor fields, an RFID card reader and a 1-Wire interface.
Last update July 14, 2025, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Wall switch, Touch panels, Personalisation, Security, Access control, RFID
Instruction for the installation of a guiding plate for the 2,4,6 and 9-field touch panels.
Last update April 18, 2025, tags: DOT family, Installation
Instruction for the installation of a guiding plate for the 18-field touch panels.
Last update April 18, 2025, tags: DOT family, Installation
Panel Creator is an application that allows you to create personalised glass touch panels used to control your smart home.
Last update March 28, 2025, tags: Automations, DOT family, Personalisation, Touch panels, Wall switch
Module M-DOT-GEST is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module recognises hand gestures made in the proximity of its surface, as well as touch gestures on the glass front.
Last update February 18, 2025, tags: Ampio CAN modules, DOT family, Wall switch, Sensors, Dallas 18B20, Input modules