Integration with Tedee lock
A guide for the integration of Gerda’s Tedee locks with the Ampio system.
Last update January 5, 2026, tags: SERV family, Integrations, Configuration, IP, Mobile app, Access control
A guide for the integration of Gerda’s Tedee locks with the Ampio system.
Last update January 5, 2026, tags: SERV family, Integrations, Configuration, IP, Mobile app, Access control
Module M-DOT-T6 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has six touch-sensitive fields and a configurable touch display, as well as a 1-Wire interface.
Last update January 5, 2026, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Display, Data visualisation, Wall switch, Touch panels, Personalisation, Access control
Module M-DOT-R14 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has fourteen sensor fields, an RFID card reader and a 1-Wire interface.
Last update November 3, 2025, tags: Ampio CAN modules, DOT family, Input modules, Wall switch, Touch panels, Personalisation, Security, Access control, RFID
A guide that describes the steps of integrating the Ampio system with the Satel-Integra alarm with the use of the M-CON-232-s and M-SERV-s modules.
Last update August 21, 2025, tags: Smart Home configurator, Access control, Ampio Designer, Integrations, RS-232
Module M-DOT-R PRO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-DOT-R PRO module is available for sale by special order. RFID card reader The module is equipped with an RFID card reader.
Last update July 14, 2025, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Security, Access control, RFID
Module M-DOT-R2 PRO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-DOT-R2 PRO module is available for sale by special order. The module has two sensor fields, an RFID card reader and a 1-Wire interface.
Last update July 14, 2025, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Wall switch, Touch panels, Personalisation, Security, Access control, RFID
A guide to configuring access control in PRO series modules.
Last update July 10, 2025, tags: Access control, Configuration, Ampio Designer, RFID, Security
A configuration guide for the alarm module in the Ampio Designer software tool.
Last update April 28, 2025, tags: Access control, Configuration, Ampio Designer, Mobile app, Security
Module M-ALARM-8s is a component of the Ampio system. Required voltage to power the module is 18 — 24V DC. The module is controlled via CAN bus. The M-ALARM-8s module has the functionality of a control panel, with eight alarm inputs, two power outputs and six binary OC outputs.
Last update April 28, 2025, tags: Ampio CAN modules, ALARM family, DIN rail modules, Security, Access control
Module M-DOT-M18 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eighteen sensor fields, a display supporting the functionality of swipeable screens, and a 1-Wire interface.
Last update February 18, 2025, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Display, Data visualisation, Wall switch, Touch panels, Personalisation, Security, Access control