Touch panel brightness settings
A guide to changing touch panel brightness settings dependent on sunrise/sunset.
Last update October 9, 2024, tags: DOT family, Personalisation, Ampio Designer, Touch panels, RT family, SERV family
A guide to changing touch panel brightness settings dependent on sunrise/sunset.
Last update October 9, 2024, tags: DOT family, Personalisation, Ampio Designer, Touch panels, RT family, SERV family
Garden irrigation provides maintenance-free care for your garden, which is additionally adjusted to weather conditions and the water source.
Last update June 5, 2024, tags: Mobile app, Personalisation, Automations
Automation functions allow you to define your own rules for the behaviour of your smart building. Learn how to plan the execution of a specified action based on the time of day or, for example, the light switching on in particular rooms.
Last update June 4, 2024, tags: Mobile app, Personalisation, Automations
Temperature controls in the Ampio UNI app allow you to create schedules and to manually change the set temperature.
Last update June 3, 2024, tags: Mobile app, Personalisation
Using the mechanism of scenes you can predefine a variety of settings for lights, blinds, or music players. The settings can then be activated in a flash at any point in the future. Use the scenes to save your favourite settings for a movie night or dinner with friends.
Last update May 29, 2024, tags: Mobile app, Personalisation, Automations
Module M-SENS is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module allows for the measurement of ambient conditions in closed spaces. The device is also equipped with an IR receiver, which makes it possible to receive commands from remote controls based on the NEC protocol.
Last update May 22, 2024, tags: Ampio CAN modules, SENS family, Input modules, Sensors, Personalisation
Module M-DOT-15 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has fifteen sensor fields, a display and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.
Last update April 15, 2024, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Display, Input modules, Wall switch, Touch panels, Personalisation
Module M-DOT-R14 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has fourteen sensor fields, an RFID card reader and a 1-Wire interface.
Last update April 15, 2024, tags: Ampio CAN modules, DOT family, Input modules, Wall switch, Touch panels, Personalisation, Security, Access control, RFID
Module M-CON-IR is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is used for IR integration. With the use of the module, it is possible to receive commands from remote controls based on the NEC protocol, and to send previously saved commands to external devices.
Last update March 21, 2024, tags: Ampio CAN modules, CON family, Output modules, Integrations, Personalisation, Air conditioning
Module M-DOT-9 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has nine sensor fields and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.
Last update March 7, 2023, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Wall switch, Touch panels, Personalisation