OWA lighting - Ampio - Knowledge Base

M-SERV-s: Remote system management and IP integrations module MSERV-4s

Module M-SERV-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-SERV-s module is a communication gateway for Ampio mobile applications - both within the local network and via the Ampio Cloud platform - and it enables IP integrations.

Last update October 29, 2024, tags: Ampio CAN modules, SERV family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, OWA lighting, LED lights, Open-collector drivers, Central heating, SATEL, Ampio Cloud, IP, Mobile app, Hotel, Node-RED, Roller shutters and blinds, RS-232, Security

M-LED-s: Ampio lighting bus controller

Module M-LED-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module acts as an OWA lighting bus controller. OWA lighting bus The OWA lighting bus (One Wire Ampio) is a solution dedicated to controlling LED lighting.

Last update September 11, 2024, tags: Ampio CAN modules, LED family, DIN rail modules, Output modules, Dimmer, LED lights, Lights, OWA lighting

M-LED-p: Ampio lighting bus controller

Module M-LED-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module acts as an OWA lighting bus controller. It also has four ground-detecting inputs and a 1-Wire interface.

Last update September 11, 2024, tags: Ampio CAN modules, LED family, Junction box modules, Wall switch, Sensors, Input modules, Output modules, Dallas 18B20, Dimmer, LED lights, Lights, OWA lighting, Central heating

S-LED-SPOT110: LED spotlight 9W 110mm Discontinued

Module S-LED-SPOT110 is a component of the Ampio system. Required voltage to power the module is 12V DC. The module is controlled via OWA lighting bus. The module is an LED spotlight with an integrated OWA lighting bus controller. When ordering the device, it is necessary to specify the expected temperature of the light source.

Last update January 12, 2023, tags: OWA lighting bus modules, LED family, LED lights, Lights, OWA lighting

S-LED-SPOT50: LED spotlight 3W 50mm Discontinued

Module S-LED-SPOT50 is a component of the Ampio system. Required voltage to power the module is 12V DC. The module is controlled via OWA lighting bus. The module is an LED spotlight with an integrated OWA lighting bus controller. When ordering the device, it is necessary to specify the expected temperature of the light source.

Last update January 12, 2023, tags: OWA lighting bus modules, LED family, LED lights, Lights, OWA lighting

S-LED-U: Ampio lighting bus voltage driver

Module S-LED-U is a component of the Ampio system. Required voltage to power the module is 11 — 24V DC. The module is controlled via OWA lighting bus. The module acts as an OWA lighting bus node driver and allows for smooth brightness adjustment of voltage-controlled LED lighting with a maximum current consumption of 8A and a rated voltage not exceeding 40V.

Last update January 12, 2023, tags: OWA lighting bus modules, LED family, Output modules, LED lights, Lights, Open-collector drivers, OWA lighting

S-LED-I48V: Ampio lighting bus current driver

Module S-LED-I48V is a component of the Ampio system. Required voltage to power the module is 30 — 60V DC. The module is controlled via OWA lighting bus. The module acts as an OWA lighting bus node driver and allows for smooth brightness adjustment of current-controlled LED lighting with a maximum current consumption of 1A and a rated voltage not exceeding 60V DC.

Last update January 12, 2023, tags: OWA lighting bus modules, LED family, Output modules, LED lights, Lights, OWA lighting

S-LED-I: Ampio lighting bus current driver

Module S-LED-I is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via OWA lighting bus. The module acts as an OWA lighting bus node driver and allows for smooth brightness adjustment of current-controlled LED lighting with a maximum current consumption of 1A and rated voltage not exceeding 12V DC.