Configuration tag


Coolmaster HVAC unit configuration guide

A guide describing the configuration of a Coolmaster unit over an IP network using the API.

Last update March 31, 2025, tags: Automations, Configuration, Ampio Designer, Air conditioning, IP, Mobile app, Temperature control

Integration with a ZigBee protocol

This guide describes the possibility of integrating with the ZigBee protocol using a gateway connected to the USB port of a module from the M-SERV family.

Last update March 19, 2025, tags: Configuration, Integrations, Node-RED, SERV family

M-CON-KNX-s configuration guide

This document explains the process of configuring the M-CON-KNX-s module to integrate it with the KNX bus.

Last update March 14, 2025, tags: Configuration, Integrations, Ampio Designer

Changing the module's type

Some of the Ampio modules allow you to change their type. The following guide describes the process of conducting such a change.

Last update February 18, 2025, tags: Configuration, Smart Home configurator

Buzzer notifications in M-DOT modules

M-DOT touch panels can generate a buzzing sound. This guide shows an example of configuring such settings.

Last update November 12, 2024, tags: DOT family, Configuration, Ampio Designer, Smart Home configurator

Camera controls in Ampio Designer

A guide on how to work with cameras in Ampio Designer using HIKVISION cameras as an example.

Last update October 30, 2024, tags: SERV family, Configuration, Integrations, IP, Mobile app, Ampio Designer, Security

Access control configuration

Access control configuration guide using the M-DOT-R14 panel as an example.

Last update October 23, 2024, tags: Access control, Configuration, Ampio Designer, Mobile app, RFID, Security

Manual updates

Some updates on the Ampio system can be initiated manually. The following guide describes the procedure for such updates.

Last update October 9, 2024, tags: Configuration, Mobile app, Ampio Designer, Node-RED, Smart Home configurator, Smart Home Manager

M-RT-s module configuration guide

The M-RT-s module is used to control heating zones in a building. This guide describes its configuration in the Ampio environment.

Last update October 9, 2024, tags: Configuration, Central heating, Ampio Designer, Mobile app, RT family

M-OUT-4s configuration guide

The M-OUT-4s module is equipped with voltage analogue outputs that allow it to integrate with devices that have voltage control inputs. This document explains how the module’s configuration is carried out.

Last update October 9, 2024, tags: Configuration, Smart Home configurator, Ampio Designer