Modules - Ampio - Knowledge Base

S-LED-U: Ampio lighting bus voltage driver

Module S-LED-U is a component of the Ampio system. Required voltage to power the module is 11 — 24V DC. The module is controlled via OWA lighting bus. The module acts as an OWA lighting bus node driver and allows for smooth brightness adjustment of voltage-controlled LED lighting with a maximum current consumption of 8A and a rated voltage not exceeding 40V.

Last update January 12, 2023, tags: OWA lighting bus modules, LED family, Output modules, LED lights, Lights, Open-collector drivers, OWA lighting

WL-OC-RGBW1p: Wireless RGBW lighting controller RF RGBW-1p

Module WL-OC-RGBW1p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via the Ampio LoRa wireless interface. The module has four OC outputs operating in an RGBW lighting controller mode.

Last update January 7, 2025, tags: Ampio LoRa wireless modules, OC family, Junction box modules, Output modules, Lights, LED lights, RGBW lights, Wireless, LoRa

WL-REL-2p: Wireless module with two relay outputs RF PR-2p

Module WL-REL-2p is a component of the Ampio system. Required voltage to power the module is 110 — 250V AC. The module is controlled via the Ampio LoRa wireless interface. The module has two relay outputs and two AC inputs.

Last update January 7, 2025, tags: Ampio LoRa wireless modules, REL family, Junction box modules, Input modules, Output modules, Relay outputs, Lights, Wall switch, Wireless, LoRa

WL-REL-ROL1p: Wireless roller blinds controller module RF ROL-2p

Module WL-REL-ROL1p is a component of the Ampio system. Required voltage to power the module is 110 — 250V AC. The module is controlled via the Ampio LoRa wireless interface. The module has two AC inputs and two relay outputs in the roller shutter and blinds' drive controller mode.

Last update January 7, 2025, tags: Ampio LoRa wireless modules, REL family, Junction box modules, Input modules, Output modules, Relay outputs, Roller shutters and blinds, Wireless, Wall switch, LoRa

WZ-SENS-TMP-p: Wireless temperature measurement module

The WZ-SENS-TMP-p module is a temperature measurement sensor from the WZ family of wireless modules. The module is powered by a single CR2032 battery and has a long transmission range (up to 300 m in open terrain). The measured temperature value is sent to the base station module and from there is fed to the CAN bus.

Last update May 12, 2025, tags: Ampio WZ family wireless modules, Wireless