Modules from the M-DOT family that come with a display can present icons on that display from the processor’s memory. Newly purchased modules have a certain set of preloaded icons available for that purpose. There is, however, a possibility of uploading other, custom icons to the internal memory. This guide explains the ins and outs of working with icons.
To start reading or writing icons, enter the M-DOT module settings (gear icon) in the main DEVICES tab. Then from the left side of the screen Parameters and the LCD content sub-tab.
Click to enlarge and open in a new tab.
To preview the current icons select Settings for one of the screens, and set Screen Type to Screen four icons.
Click to enlarge and open in a new tab.
Then select any icon field to display all the icons available in the panel’s memory.
Click to enlarge and open in a new tab.
When you select one of the icons, you can choose Choose or Replace. When Choose is selected, any icon can be uploaded from your drive in .png format and uploaded to the M-DOT panel memory.
Click to enlarge and open in a new tab.
Once all the icons have been uploaded and selected, confirm the changes and send the new settings to the panel using the Send parameters to module button.
*from January 2024, the Smart Home Configurator software is no longer being developed. It is recommended to use it only in substantiated instances.
After launching the Ampio Smart Home configurator, select an M-DOT panel from the list, with which you want to work on the icons.
Click to enlarge and open in a new tab.
Go to Device parameters, then open the LCD tab and, finally, the Icons subtab.
Click to enlarge and open in a new tab.
At the bottom of the window, there is a tick box that will allow you to work on multiple icons simultaneously.
Click to enlarge and open in a new tab.
Start working on the icons by clicking on Download from the same bottom menu, and wait for all the icons to download.
Click to enlarge and open in a new tab.
Icon files can be saved on your computer. Each icon comes with the option of opening the file, sending it to a device, or downloading it from the device. The icons can also be given descriptions.
You can upload a single icon to the panel’s memory, as well as multiple icons. For a single icon, select the button of opening from a file shown below.
Click to enlarge and open in a new tab.
From your computer, select a picture file in one of the accepted formats (e.g. .png or .jpeg) in any resolution. The file will be scaled and displayed in the configurator. In order for it to be useable, you have to send it to the device.
In the LCD tab, after opening the subtab Content, select which icon should be displayed. For example, for M-DOT-M6 shown below the display mode Four icons and content have been selected for the first screen.
Click to enlarge and open in a new tab.
By default, an icon from the N.act row is shown. In order to display the icon for Act (active), a particular condition created in the Device configurator must be met. Once you have configured all the screens, it is necessary for you to click Send in the bottom right corner, in order to save the parameters in the device memory.