Touch panel brightness settings
A guide to changing touch panel brightness settings dependent on sunrise/sunset.
Last update October 9, 2024, tags: DOT family, Personalisation, Ampio Designer, Touch panels, RT family, SERV family
A guide to changing touch panel brightness settings dependent on sunrise/sunset.
Last update October 9, 2024, tags: DOT family, Personalisation, Ampio Designer, Touch panels, RT family, SERV family
In the Ampio system, there is a possibility of managing multiple heating zones in a building with the use of only one touch panel. The following guide describes the process of configuring such a functionality.
Last update October 9, 2024, tags: Configuration, Ampio Designer, Temperature control, Central heating, Display, DOT family, Touch panels
A guide that provides general information about the Ampio installer kit and describes basic configuration that can be carried out with it.
Last update April 30, 2024, tags: Configuration, Dallas 18B20, Ampio Designer, Touch panels, SERV family
Module M-DOT-15 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has fifteen sensor fields, a display and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.
Last update April 15, 2024, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Display, Input modules, Wall switch, Touch panels, Personalisation
Module M-DOT-R14 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has fourteen sensor fields, an RFID card reader and a 1-Wire interface.
Last update April 15, 2024, tags: Ampio CAN modules, DOT family, Input modules, Wall switch, Touch panels, Personalisation, Security, Access control, RFID
Module M-DOT-9 is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has nine sensor fields and a 1-Wire interface. Sensor fields The touch panel sensor fields are capacitive buttons located behind the glass pane, which is the front of the module.
Last update March 7, 2023, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Input modules, Wall switch, Touch panels, Personalisation