A guide describing the configuration of Ampio devices to automate the closing and opening of roller shutters according to sunrise and sunset.
Last update September 12, 2024, tags: RT family, SERV family, REL family, Roller shutters and blinds, Relay outputs, Automations, Configuration, Ampio Designer
Module WL-REL-2p is a component of the Ampio system. Required voltage to power the module is 110 — 250V AC. The module is controlled via the Ampio LoRa wireless interface. The module has two relay outputs and two AC inputs.
Last update July 29, 2024, tags: Ampio LoRa wireless modules, REL family, Junction box modules, Input modules, Output modules, Relay outputs, Lights, Wall switch, Wireless, LoRa
Module M-REL-2s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has two relay outputs and supports the functionality of a controller for the roller shutters and blinds’drives.
Last update July 29, 2024, tags: Ampio CAN modules, REL family, DIN rail modules, Output modules, Relay outputs, Lights, Roller shutters and blinds
Module M-REL-2p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has two relay outputs, two ground-detecting inputs and a 1-Wire interface. It also supports the functionality of a controller for the roller shutters and blinds' drives.
Last update July 29, 2024, tags: Ampio CAN modules, REL family, Junction box modules, Input modules, Output modules, Relay outputs, Lights, Roller shutters and blinds, Wall switch
Module M-REL-C10s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has ten relay outputs and supports the functionality of a controller for the roller shutters and blinds' drives.
Last update July 29, 2024, tags: Ampio CAN modules, REL family, DIN rail modules, Input modules, Output modules, Relay outputs, Lights, Roller shutters and blinds, Wall switch
Module M-REL-10s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has ten relay outputs, ten ground-detecting inputs and a 1-Wire interface. It also supports the functionality of a controller for the roller shutters and blinds' drives.
Last update July 29, 2024, tags: Ampio CAN modules, REL family, DIN rail modules, Input modules, Output modules, Relay outputs, Lights, Roller shutters and blinds, Wall switch
Module M-REL-C4s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has four relay outputs and four ground-detecting inputs. It also supports the functionality of a controller for the roller shutters and blinds' drives.
Last update July 29, 2024, tags: Ampio CAN modules, REL family, DIN rail modules, Input modules, Output modules, Relay outputs, Lights, Roller shutters and blinds, Wall switch
Module M-REL-8s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has eight relay outputs, eight ground-detecting inputs and a 1-Wire interface. It also supports the functionality of a controller for the roller shutters and blinds' drives.
Last update July 29, 2024, tags: Ampio CAN modules, REL family, DIN rail modules, Input modules, Output modules, Relay outputs, Lights, Roller shutters and blinds, Wall switch
Module WL-REL-ROL1p is a component of the Ampio system. Required voltage to power the module is 110 — 250V AC. The module is controlled via the Ampio LoRa wireless interface. The module has two AC inputs and two relay outputs in the roller shutter and blinds' drive controller mode.
Last update July 9, 2024, tags: Ampio LoRa wireless modules, REL family, Junction box modules, Input modules, Output modules, Relay outputs, Roller shutters and blinds, Wireless, Wall switch, LoRa