The M-OUT-4s module is equipped with voltage analogue outputs that allow it to integrate with devices that have voltage control inputs. This document explains how the module’s configuration is carried out.
Last update October 9, 2024, tags: Configuration, Smart Home configurator, Ampio Designer
Introduction into creating linked conditions.
Last update October 9, 2024, tags: Configuration, Smart Home configurator, Ampio Designer
A guide for the integration of Ampio with the DALI system.
Last update October 9, 2024, tags: Lights, Dimmer, Dali, Integrations, Configuration, Ampio Designer
A guide that describes the steps of integrating the Ampio system with the Satel-Integra alarm with the use of the M-CON-232-s and M-SERV-s modules.
Last update October 9, 2024, tags: Smart Home configurator, Access control, Ampio Designer, Integrations, RS-232
A description of the configuration of integration software with the majority of devices supporting the MODBUS RS485 protocol
Last update October 9, 2024, tags: Configuration, Integrations, RS-485, Modbus, Smart Home configurator, Ampio Designer
In the Ampio system, there is a possibility of managing multiple heating zones in a building with the use of only one touch panel. The following guide describes the process of configuring such a functionality.
Last update October 9, 2024, tags: Configuration, Ampio Designer, Temperature control, Central heating, Display, DOT family, Touch panels
The following guide describes the configuration of modules from the M-INOC and M-OC family in the Ampio system.
Last update October 9, 2024, tags: Configuration, Lights, Smart Home configurator, Ampio Designer, IN family, OC family
Introduction to the use of virtual devices in Ampio projects and a summary of their capabilities.
Last update October 2, 2024, tags: Ampio Designer, Configuration, Smart Home configurator, Node-RED, Integrations, Temperature control, Automations
The guide describes a procedure of updating the SD card image in an M-SERV family module.
Last update October 1, 2024, tags: SERV family, Configuration, Ampio Designer
A guide describing the configuration of Ampio devices to automate the closing and opening of roller shutters according to sunrise and sunset.
Last update September 12, 2024, tags: RT family, SERV family, REL family, Roller shutters and blinds, Relay outputs, Automations, Configuration, Ampio Designer