Dallas 18B20 tag

  1. Knowledge Base
  2. Tags
  3. Dallas 18B20

M-LED-p: Ampio lighting bus controller

Module M-LED-p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module acts as an OWA lighting bus controller. It also has four ground-detecting inputs and a 1-Wire interface.

Last update April 21, 2026, tags: Ampio CAN modules, LED family, Junction box modules, Wall switch, Sensors, Input modules, Output modules, Dallas 18B20, Dimmer, LED lights, Lights, OWA lighting, Central heating

M-DOT-R PRO: Panel module with built-in RFID reader

Module M-DOT-R PRO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-DOT-R PRO module is available for sale by special order. The minimum order for the R PRO series is 10 items.

Last update February 19, 2026, tags: Ampio CAN modules, DOT family, Sensors, Dallas 18B20, Security, Access control, RFID

Installer kit - basic information and configuration

A guide that provides general information about the Ampio installer kit and describes basic configuration that can be carried out with it.

Last update April 30, 2024, tags: Configuration, Dallas 18B20, Ampio Designer, Touch panels, SERV family

M-IN-2p: Module with two bi-state inputs

Module M-IN-2p is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has two ground detecting inputs, a 1-Wire interface and a brightness sensor.

Last update November 2, 2023, tags: Ampio CAN modules, IN family, Junction box modules, Wall switch, Sensors, Input modules, Dallas 18B20

All rights reserved © 2026 ampio.com