What Ii the LOGS tab?
The LOGS panel is used to view events and messages from the Ampio system. With this panel, you can:
- check what events have occurred in the system (e.g., state changes, sent commands);
- see the exact timestamp of each event;
- filter events by date, time, modules, and outputs.
This panel is essential for system diagnostics and commissioning – it lets you quickly check what is happening in the installation.
When should you use it?
- During commissioning of a new system – to make sure that events are occurring correctly.
- While troubleshooting issues – to quickly locate why something isn’t working.
- When checking device and output reactions – e.g., verifying which device sent a command.
How to read and analyse it?
Table columns:
| Column |
Description |
| Time |
Exact event time + milliseconds. |
| Name |
Name and type of the device that generated the event. |
| Type |
Type of event that occurred in the system. |
| Output Info |
Name of the output related to the event or command information. |
| Value |
Value of the change or message content (e.g., 0/1 for binary outputs). |
| Action |
“Show +5/-5s” button – filters logs around this event when clicked. |
Filtering logs – step by step:
- Select a date range – you can choose a single day or a range of several days.
- Set the time (optional) – you can limit results to a specific time window during the day.
- Select a device – to show logs only from a specific module.
- Select outputs (optional) – to display only events related to specific outputs.
The log list updates automatically after each filter change.
Tip
Always start diagnostics by:
- Setting the date range.
- Selecting the module and optionally the outputs.
- Using the “SHOW +5/-5s” button to view events in context.
