DIN rail modules - Ampio - Knowledge Base

M-SERV-s: Remote system management and IP integrations module MSERV-4s

Module M-SERV-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-SERV-s module is a communication gateway for Ampio mobile applications - both within the local network and via the Ampio Cloud platform - and it enables IP integrations.

Last update August 22, 2025, tags: Ampio CAN modules, SERV family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, OWA lighting, LED lights, Open-collector drivers, Central heating, SATEL, Ampio Cloud, IP, Mobile app, Hotel, Node-RED, Roller shutters and blinds, RS-232, Security

M-REL-2s: Module with two relay outputs MROL-2s

Module M-REL-2s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has two relay outputs and supports the functionality of a controller for the roller shutters and blinds’drives.

Last update August 22, 2025, tags: Ampio CAN modules, REL family, DIN rail modules, Output modules, Relay outputs, Lights, Roller shutters and blinds

M-REL-C10s: Module with ten relay outputs

Module M-REL-C10s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has ten relay outputs and supports the functionality of a controller for the roller shutters and blinds' drives.

Last update August 22, 2025, tags: Ampio CAN modules, REL family, DIN rail modules, Input modules, Output modules, Relay outputs, Lights, Roller shutters and blinds, Wall switch

M-REL-10s: Module with ten relay outputs

Module M-REL-10s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has ten relay outputs, ten ground-detecting inputs and a 1-Wire interface. It also supports the functionality of a controller for the roller shutters and blinds' drives.

Last update August 22, 2025, tags: Ampio CAN modules, REL family, DIN rail modules, Input modules, Output modules, Relay outputs, Lights, Roller shutters and blinds, Wall switch

M-REL-C4s: Module with four relay outputs

Module M-REL-C4s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has four relay outputs and four ground-detecting inputs. It also supports the functionality of a controller for the roller shutters and blinds' drives.

Last update August 22, 2025, tags: Ampio CAN modules, REL family, DIN rail modules, Integrations, Input modules, Output modules, Relay outputs, Lights, Security, Roller shutters and blinds, Wall switch

M-DIM-2s: Dimmer module with two outputs

Module M-DIM-2s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module has two dimmable outputs. In the standard version of the module, the maximum power of the receiver connected to a single output is 150W.

Last update August 22, 2025, tags: Ampio CAN modules, DIM family, Output modules, DIN rail modules, Lights, Dimmer

M-ROOM-s PRO: Comprehensive apartment administration module

Module M-ROOM-s PRO is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module can provide many of the functionalities envisioned by the Ampio building automation system’s architecture.

Last update August 22, 2025, tags: Ampio CAN modules, ROOM family, Wall switch, Sensors, Dallas 18B20, Input modules, Output modules, Relay outputs, DIN rail modules, Integrations, Lights, LED lights, Open-collector drivers, Central heating, SATEL, Hotel, Roller shutters and blinds, RS-232, RS-485, Security

Wiring and powering of the Ampio installation

A guide that describes the basics of connecting the Ampio modules in a smart building installation.

Last update August 7, 2025, tags: Installation, DIN rail modules, DOT family, RDN family, Wall switch

M-CON-DL-s: DALI bus integration module MDALI-1s, M-CON-DALI-s

Module M-CON-DL-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The module is intended for integration with lighting with a Dali interface. Dali is the main lighting used in industrial halls, large-format supermarkets and with the ongoing rapid development of automation systems, also in residential buildings.

Last update July 21, 2025, tags: CCT, Ampio CAN modules, CON family, Output modules, DIN rail modules, Lights, Dimmer, Dali, Integrations, LED lights, RGBW lights

M-SERV-MINI-s: Remote system management and IP integrations module

Module M-SERV-MINI-s is a component of the Ampio system. Required voltage to power the module is 11 — 16V DC. The module is controlled via CAN bus. The M-SERV-MINI-s module is a communication gateway for Ampio mobile applications - both within the local network and via the Ampio Cloud platform - and enables IP integrations.

Last update July 16, 2025, tags: Ampio CAN modules, SERV family, Output modules, DIN rail modules, Integrations, Ampio Cloud, IP, Mobile app, Node-RED, Open-collector drivers, Central heating

DIN rail modules tag