The IP-accessible Coolmaster unit can be controlled from the Ampio UNI mobile app.
Using Windows as an example, start by entering Control Panel, then Programs and Features.
Select Turn Windows features on or off.
Click to enlarge and open in a new tab.
If the Telnet client is not active then select it and press OK.
Click to enlarge and open in a new tab.
You may need to restart your computer after activation.
The IP address and port must be read from the HVAC unit.
Click to enlarge and open in a new tab.
Open a Windows terminal, e.g. with the cmd command, and type telnet IP port.
Click to enlarge and open in a new tab.
Then type rest enable.
And rest port 8080.
A message OK, Boot required! should appear, so you will need to reset the Coolmaster unit.
In the Ampio Designer, go to the APPLICATION tab and create a new object in any group with the settings:
Click to enlarge and open in a new tab.
Once the object has been saved, the air conditioning can now be controlled from the mobile app.
